Free Footstep and Jump Sound Effects
Footsteps, jumps, landings and the other sounds of a character on the move. The group covers steps on different ground such as grass, stone and wood, a quick jump and a soft landing, a fast dash, climbing a ladder and splashing into water. They fit platformers, top down adventures, RPGs and any game where the player walks across different surfaces.
Tip: footsteps get noticed when they repeat exactly. Pick the steps that match the surface under the player, play each step at a slightly different pitch, and keep them quieter than the music and the action so they sit underneath everything else.
14 sounds in this group: Jump, Land, Footsteps on grass, Footsteps on stone, Footsteps on wood, Dash, Ladder climb, Splash, Steps on metal, Steps on sand, Steps in snow, Double jump, Slide and Swim.
WAV, OGG and MP3, CC0. Download this group (.zip, 3.4 MB) · Download all 150 sounds (.zip, 44.5 MB).
Jump
A sneaker scuff and a short whoosh. 0.8 s.
Download: WAV (77 KB) · OGG (12 KB) · MP3 (21 KB)
Land
A soft thud on landing. 0.65 s. Goes with the Landing dust sprite.
Download: WAV (62 KB) · OGG (10 KB) · MP3 (17 KB)
Footsteps on grass
Soft rustling steps. 3 s.
Download: WAV (288 KB) · OGG (36 KB) · MP3 (73 KB)
Footsteps on stone
Hard, clear steps. 2.93 s.
Download: WAV (281 KB) · OGG (33 KB) · MP3 (71 KB)
Footsteps on wood
Hollow, creaky steps. 2.96 s.
Download: WAV (284 KB) · OGG (32 KB) · MP3 (73 KB)
Dash
A very fast whoosh. 0.9 s.
Download: WAV (87 KB) · OGG (12 KB) · MP3 (23 KB)
Ladder climb
Rhythmic clanks on a metal ladder. 2.83 s.
Download: WAV (272 KB) · OGG (31 KB) · MP3 (70 KB)
Splash
A big splash into water. 1.92 s. Goes with the Water splash sprite.
Download: WAV (184 KB) · OGG (27 KB) · MP3 (47 KB)
Steps on metal
Footsteps on a metal floor. 3 s.
Download: WAV (288 KB) · OGG (36 KB) · MP3 (73 KB)
Steps on sand
Soft crunching steps in sand. 3 s.
Download: WAV (288 KB) · OGG (39 KB) · MP3 (73 KB)
Steps in snow
Crunchy steps in fresh snow. 3 s.
Download: WAV (288 KB) · OGG (41 KB) · MP3 (73 KB)
Double jump
Two quick airy whooshes. 0.25 s.
Download: WAV (24 KB) · OGG (7 KB) · MP3 (8 KB)
Slide
Sliding across a floor. 1.06 s.
Download: WAV (102 KB) · OGG (15 KB) · MP3 (27 KB)
Swim
Arms paddling through water. 2.99 s.
Download: WAV (287 KB) · OGG (40 KB) · MP3 (73 KB)
Using the footstep and movement sounds
Each footsteps file is a short run of several steps on one surface, not a single step, and there are two ways to use it. The quick one is to play the run while the character walks and stop it when they stop, which works in top down games where the walking speed never changes. The better one is to cut single steps out of the run in a free audio editor such as Audacity and play one on each footfall of the walk animation. One file then gives you several slightly different steps for that surface, and you can rotate through them.
To pick the right surface, check what is under the player’s feet each time a step plays: a custom data layer on the tile in a Godot TileSet, a tag or a physics material on the floor collider in Unity, or a custom property on the tile in Tiled. Store the surface name on the tile once and the footsteps follow by themselves as you paint the level. Ladder climb is a run of clanks too, so play it while the player climbs and stop it the moment they stop.
Abilities should sound different from basic movement, because the player needs to know they used them. Double jump has two airy whooshes, unlike the ordinary Jump, so a player always hears whether their second jump went off. Dash and Slide are short bursts that suit moves on a cooldown; let each one finish rather than restarting it if the player taps again. Scale the volume of Land with the height of the fall, so a big drop thumps and a small hop barely registers.
Which movement sound for which action
- Jump (0.8 s) and Double jump (0.25 s): Leaving the ground, then the extra jump in mid air.
- Land (0.65 s): Touching down after a jump or a fall. It goes with the landing dust sprite.
- Footsteps on grass (3 s), Steps on sand (3 s) and Steps in snow (3 s): Soft ground outdoors: meadows and forests, beaches and deserts, winter levels.
- Footsteps on stone (2.93 s), Footsteps on wood (2.96 s) and Steps on metal (3 s): Hard floors: stone for castles, caves and city streets, wood for cabins, bridges and ship decks, metal for spaceships, factories and catwalks.
- Dash (0.9 s) and Slide (1.06 s): Quick bursts of speed: a dash ability, a dodge, a slide under a low gap.
- Ladder climb (2.83 s): Climbing ladders, chains and scaffolding.
- Splash (1.92 s) and Swim (2.99 s): Water: the splash as the player falls in, then the swim while they paddle through it. The splash goes with the water splash sprite.
Questions
How do I sync footstep sounds with a walk animation?
Play a step on the frames where a foot touches the ground, not on a timer. Most engines can call a function from an animation frame: an Animation Event in Unity, or a Call Method track in Godot’s AnimationPlayer. The steps then speed up and slow down with the animation.
How do I play different footsteps on grass, stone and wood?
Check what the player is standing on, for example from the tile under their feet or a tag on the floor, and play the matching step. Change the pitch slightly on each step so a long walk does not sound like a loop.
How loud should jump and landing sounds be?
Keep them soft. The player jumps all the time, so a quiet jump and landing read well without getting tiring. Save the louder sounds, like a splash, for things that happen less often.
Every sound here is CC0: use it in any project, commercial or not, with no credit needed. More answers about the license, the formats and looping are on the full sound effects page.
More free sound effects
- Free Rain and Ambient Sound Loops: 12 sounds
- Free Sword and Combat Sound Effects: 16 sounds
- Free Coin and Pickup Sound Effects: 16 sounds
Popular sounds: Jump
Sprites to go with these sounds
- Free Animated Pixel Art Tiles & Props: 9 animated sprites